Method 2 for Debian jessie system (thanks to justin81)'http://localhost:8080/json.htm?type=command¶m=updateuservariable&idx=PARAM_IDX&vname=PARAM_NAME&vtype=2&vvalue=PARAM_CMD''https://domain.com:XXXX/json.htm?type=command¶m=updateuservariable&idx=PARAM_IDX&vname=PARAM_NAME&vtype=2&vvalue=PARAM_CMD'Method 2 for Debian jessie system (thanks to justin81)--Variable scripts receive 7 tables from Domoticz: -- otherdevices, otherdevices_lastupdate, otherdevices_svalues, otherdevices_idx, uservariables, uservariables_lastupdate and uservariablechanged-- switch Off Alarm because 1 beacon come back Home This script needs the device you want to check to have a static IP. Now connect to Domoticz with your browser and go to the “Setup/Hardware” page and select the “UPS Monitor” type from the drop-down list Enter the IP address of the NUT server on your LAN (or 127.0.0.1 if the NUT server runs on the same machine as Domoticz) Enter the port of the NUT server (if different from the default (3493)

Notifications/Alerts can be sent to any mobile device.

When the version will be higher , you could do a simple : sudo apt-get install bluez TODO check the right of gatttool. Only the "UPS Status" device is always created by the plugin, others are created if the specific UPS reports the variable.

Domoticz ist ein quelloffener Lösungsbaustein für die Steuerung eines Smart Homes. This is a compromise setting to avoid undue network traffic) Domoticz als Steuerungszentrale ist aus zwei Gründen sehr interessant: Zum einen ist die Zahl der unmittelbar unterstützten Geräte bereits beeindruckend. And "AWAY" oth… The output will be displayed on screen , or in log file according to the parameter in the script:If uservariables are updating correctly, go head with the installation and edit the script to log to file.

Contains UDP server for receive data from scanner. Domoticz is a very light weight home automation system that lets you monitor and configure miscellaneous devices, including lights, switches, various sensors/meters like temperature, rainfall, wind, ultraviolet (UV) radiation, electricity usage/production, gas consumption, water consumption and many more. Ich trage ein Fitness Tracker Xiaomi Mi … MQTT Anwesenheitserkennung per Bluetooth BLE für Hausautomatisierung z.B FHEM, Node-RED, iobroker, openHAB, Domoticz. Notifications/alerts can be sent to any mobile device. Now connect to Domoticz with your browser and go to the “Setup/Hardware” page and select the “UPS Monitor” type from the drop-down list

In case something does not work, enable the “Debug” mode for the plugin in the “Settings/Hardware” page and check the logs for errors and send me a pm @ logread on the Domoticz forum with the description of the error(s) and copy of the relevant log entries.

And Finally, register the service to autorun the script when the Raspberry Start :The autostart has to be modified to use systemctl instead of the update-rc.d method to run at the end of all initializations. This last method is the most preferred, because it doesn't involve making changes on the … (set execution right chmod +x ?) IMPORTANT NOTE: This is Beta software, so you use it at your own risk…

Prepare to install. Die Idee In jedem Raum befindet sich bluetooth Präsenzmelder auf Basis von ESP32 – Modul.

Choose for each beacon which one you want :You can use this to see if a person (who always carries his/her beacon) is at home or not, and trigger events based on this.You will need a Bluetooth 4.0 compatible USB adapter to use with the Pi. It Depends of your system. Check the presence of a list of beacons (BlueTooth Low Energy V4.0) and update uservariables in Domoticz accordingly.Required in Domoticz, a uservariable of type String for each BLE TagScript operates in 2 mode. And you are done… the plugin will create serveral devices, some immediately visible in the "Utilities" tab of Domoticz, others that you will find in the “Settings/Devices” page and then can mark as used to move these to the “Utilities” page (these are marked as unused by default to avoid clutter on the Domoticz interface… See below screen shot for illustration
Die Entwicklergemeinschaft bietet die Software für alle aktuellen Rechnerplattformen an. To ensure the USB Bluetooth device is being seen, runWith the Pluggable adapter shown above, the result will look like this:It shall activate the hci0 port, and detect all beacons around. This system is designed to operate in various operating systems. Windows) but I assume a bit of search on the Domoticz forum can help you… The below instructions are for a Raspberry Pi Linux platform… I have not tested this on other platform (e.g. Do you use wheezy or jessie ? These instructions assume a Debian-based Linux. Expose via Domoticz devices a number of status variables reported by compatible UPS (Uninterruptible Power Supply) units via a NUT (Network UPS Tools) server running on the same local network as the Domoticz system. It is tested to work with BlueZ 5.47, but it should work with 5.43+ too. So hat der Nutzer die Wahl und größtmögliche Flexibilität, was den Unterbau seines Systems betrifft. It fetches the UPS data directly from the NUT Server via a telnet session, updated every minute (hence any change in the UPS status such as switching to backup power may take up to one minute to be reflected.

Most plugins run on all platforms supported by Domoticz but the PP-Manager itself currently is only for Debian Based Installations (Linux,Raspberry Pi) To use a plugin on a non-Debian platform follow the manual install instructions for the individual plugin itself And now the installation of the service (and auto run at start of the raspberryPi)
reboot the system (from domoticz or 'sudo reboot') Pair bluetooth speaker and enable audio (First try without the next step, it was in the instructions I used, but does not seem to be needed, please remove from this instruction when not needed) 'sudo hciconfig hci0 up' Enable your bluetooth speaker (power-on) and find the speaker Check the presence of a list of beacons (BlueTooth Low Energy V4.0) and update uservariables in Domoticz accordingly. An example could be a UPS compatible with a Synology NAS and connected to it with UPS management enabled on the Synology NAS.

The following devices have been tested:First install Dependencies that the bluez library uses.